Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.
Did you try "net use" with your VPN? I know CVS works with my VPN after I issue the "net use" command. But, VPN's can be tricky so maybe I was just lucky. - Brian Bo Berglund wrote: > The "named pipe" error is fired when the :ntserver: protocol is used but there > is either no NetBios connection between client and server or there is no trust > established between the two computers. Normally this works fine if both the server > and the client are on the same NT domain and are both NT class machines of course. > But I have experienced problems for example when connecting through a VPN channel > to a remote network domain where my workstation is not a member. In this case there > are two options: > 1) Fall back to :pserver: protocol (or maybe sspi, which I have no experience of) > 2) Map a network drive on the server from the client. It does not matter which > share is connected, as long as the mapping is in place the named pipe exists > and you can use CVS fine to the repository, which should reside on a disk with > *no* shares defined... > > /Bo > > > -----Original Message----- > From: Jörg Krein [mailto:joerg.krein at ims.fhg.de] > Sent: den 20 mars 2002 10:31 > To: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook > Subject: Re: [Cvsnt] CVS for NT 1.11.1.3 in ntserver mode? > > > > Hmm I hope this is the right way to answer.....? > > Yes, thank you! The dll does help it. > Of course there is another problem now: > cvs [import aborted]: Couldn't connect to named pipe on remote machine: > Error 2 > I'm missing something like a list of errors with solving tips. > I only found somethig about error 6. > Maybe someone can help me again? > > -----Ursprüngliche Nachricht----- > Von: cvsnt-admin at cvsnt.org [mailto:cvsnt-admin at cvsnt.org]Im Auftrag von > Gerhard Stegemann > Gesendet: Montag, 18. März 2002 16:41 > An: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook > > Betreff: Re: [Cvsnt] CVS for NT 1.11.1.3 in ntserver mode? > Do you have the ntserver_protocoll.dll in your path or in the directory > where your copy of CVS.EXE ist? The CVS client needs the according > protocol DLL to communicate to the CVS server. > MfG, > > Jörg Krein > Fraunhofer IMS > Finkenstr. 61 > D-47057 Duisburg > GERMANY > > _______________________________________________ > Cvsnt mailing list > Cvsnt at cvsnt.org > http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs > _______________________________________________ > Cvsnt mailing list > Cvsnt at cvsnt.org > http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs > _______________________________________________ Cvsnt mailing list Cvsnt at cvsnt.org http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs