Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.
here's my long story on the error's. I first got this error after downloading 57d. I went through and reloaded about 6 times..uuugg. Then found that if I unchecked "Use local instead of Domain" the error went away.. Posted this... I then installed on a clean Win2K Server on a Domain,, Same error ,, I unchecked "Use Local instad of Domain" and it went away. But I could not authenticate with the CVS Server this way since it was on a Domain so I started playing with port numbers and stopping and restarting the server. Now I have no errors and I am on port 9191. Both the origanal Server and the clean one are working now. Why? I have no clue other than mabey something in the port or authentication stuff was not getting registered properly or??? All I know is that it is working localy and remotly and I am happy. P.S Thank you for all the help Tony, Bo and others... M;) > Mike, you're not alone. > The same with our installation. After connecting with WinCVS from > remote on the server screen this window appeared: > > The instruction at "0x778cb03d" referenced memory at "0x000000" the > memory could > > not be written" > :-(or something similar in german language) > > > > regards > sascha > > > Mike wrote: > >> After getting everything working I am now getting this error >> >> cvs [login aborted]: connect to192.168.0.99 (192.168.0.99):2401 >> failed: No connection could be made because the target machine >> actively refused it. >> >> I change nothing since having it running fine last nite other that >> shutting it off. Used the setup >> steps shown here >> http://w1.858.telia.com/~u85831169/InstallCVSNT.html >> >> I also tried removing and reinstalling the latest version build 57d >> after completely uninstalling the former version and removing all >> reference in the registry. >> >> An now I get memory error when I try to login like so >> >> set cvsroot=:pserver:me at 192.168.0.99:/test >> cvs login >> >> Asks for password I enter it and get >> The instruction at "0x77" referenced memory at "0x000000" the memory >> could not be written" >> >> My Server is >> Win2K 326MEG RAM >> SP 2 >> >> Help >> >> m;) >> >> _______________________________________________ >> Cvsnt mailing list >> Cvsnt at cvsnt.org >> http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs >> >> _______________________________________________ >> Cvsnt mailing list >> Cvsnt at cvsnt.org >> http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs > > > > _______________________________________________ > Cvsnt mailing list > Cvsnt at cvsnt.org > http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs _______________________________________________ Cvsnt mailing list Cvsnt at cvsnt.org http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs