Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.
Ariel FYI I believe I had this problem because of the different domains we have in our network. I tried to connect using a username which belongs in the same domain as the new server , and it works. Is there anyway in CVS to overcome this. or this has to be fixed on our network setup. TIA Ariel Machado wrote: > Remember: pserver need add the users to CVS server! > Check the CVSROOT/passwd file from the old and new server. > > Recomend to read http://www.cvsnt.org/wiki/InstallationTips (Adding CVS > users ) > > First, check if can establish a connection with CVSNT server: open a > command-line and execute this command on a developer box: > > cvs -d:pserver:user at domain_name:/repository login > > (user , domain_name and repository are substituided with you configuration) > Is requested a password (the password for this user). > > If logged with sucess, can test a command to list modules in repository: > cvs -d:pserver:user at domain_name:/repository ls > > > Ariel > > > > "Dn" <kumar_anjaly at yahoo.com> escreveu na mensagem > news:40362CCB.9040508 at yahoo.com... > >>Ariel >> >>attached(screen shot)of the connection properties >>from WSAD. >> >>Everything I gave is the same as for the test server except for the IP >>address. >> >>Connection method is selected as "pserver" in both the cases. >> >>Do we have to register the username somewhere in CVS to access the >>repository >> >>TIA >> >>Ariel Machado wrote: >> >>>Basically it exists two forms to access to a repository: defining an >>>enviroment variable CVSROOT where :protocol:server:repository is >> > defined, > >>>example CVSROOT =:sspi:server_cvs:/development >>> >>>When executes cvs commands, this it uses this variable to comunicate >> > with > >>>the server. >>>For example, from command-line execute "cvs ls" will return the modules >> > that > >>>repository of CVS defined by variable CVSROOT has. >>> >>> The other way is to explicitly define in each CVS command the >> > communication > >>>parameters. Example: "cvs - d:sspi:cvs_server:/development ls" >>> >>>Case does not have defined variable CVSROOT, verifies in the >> > configuration > >>>of the WSAD as they are the parameters of communication with the CVS >> > server. > >>>Can try from command-line some cvs commands as it explains, to see is >> > able > >>>to make the communication. >>> >>>Perhaps the WSD this configured to accede to the old server, and now the >> > new > >>>server has another name..... >>>I do not know the options the WSAD application, but must exist a menu >> > where > >>>configure the parameters of the CVS. >>>That allow to know that type of communication this trying to be made. >>> >>> Say soon if it solved the problem. >>> >>>Ariel Machado >>> >>> >>>"Dn" <kumar_anjaly at yahoo.com> escreveu na mensagem >>>news:403618D1.4080409 at yahoo.com... >>> >>> >>>>Ariel >>>> >>>>Thanks for the response >>>> >>>>No the new server is in a different domain, But I have access to that >>>>domain. If I try to login to that server some other means , it will let >>>>me in >>>> >>>> >>>>>Verify the configuration of the new server, at domain level if this >>>> >>>using >>> >>> >>>>>protocol SSPI. >>>> >>>>WHere do I check this ? >>>> >>>>Thanks >>>> >>>> >>>>Ariel Machado wrote: >>>> >>>> >>>>>The new server is in the same domain that the old one? If he tries to >>>> >>>access >>> >>> >>>>>to a shared resource (ex- a shared folder) of the new server, being >>>> > used > >>>>>that user and password, have access? >>>>>Verify the configuration of the new server, at domain level if this >>>> >>>using >>> >>> >>>>>protocol SSPI. >>>>>Ariel Machado >>>>> >>>>>"Dn" <kumar_anjaly at yahoo.com> escreveu na mensagem >>>>>news:403611F9.8090902 at yahoo.com... >>>>> >>>>> >>>>> >>>>>>Sorry for posting again , >>>>>> >>>>>>Hi >>>>>> >>>>>>I recentlly installed CVSNT(2.0.24) in a different server and copied >>>>> > the > >>>>>>repository to the new location. >>>>>> >>>>>>When I try to connect to the new location , I am getting an invalid >>>>>>username/password error. But the user name is a valid user in the >>>>> >>>domain. >>> >>> >>>>>>I have checked off the option to use the "local users instaad of >>>>> > domain > >>>>>>users " in CVSNT control panel. >>>>>> >>>>>>EVerything still works with the old server. >>>>>> >>>>>>I am using WSAD as the client. >>>>>> >>>>>>Please advise >>>>>> >>>>>>Thanks >>>>>> >>>>> >>>>> >>>>> >>> >> > >