Community technical support mailing list was retired 2010 and replaced with a professional technical support team. For assistance please contact: Pre-sales Technical support via email to sales@march-hare.com.
You could also switch away from CVSWEB and use ViewCvs instead. For that there is a Windows installer that takes care of most setup stuff. Look here: http://russ.hn.org/viewcvs/ and here: http://w1.858.telia.com/~u85831169/ViewCvsSetup.html /Bo -----Original Message----- From: cvsnt-bounces at cvsnt.org [mailto:cvsnt-bounces at cvsnt.org]On Behalf Of Wing Hang Chan Sent: den 27 januari 2004 06:56 To: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook Subject: RE: [cvsnt] [CVSWEB NT] Installation Problems Thx for your advice. I tried and gave everyone full control to all of my drives. But still couldn't get it working. In addition to the "script produced no output" problem, occasionally an application error would occur too. inetinfo.exe - Application Error The instruction at "0x77f580c9" referenced memory at "0x000001f5". The memory could not be "read". An amazingly, the script worked once for me and I was able to see my root modules, but it couldn't work again after that one time. Would there be other things that I could try? Any advice would be appreciated. /Arhang -----Original Message----- From: cvsnt-bounces at cvsnt.org [mailto:cvsnt-bounces at cvsnt.org] On Behalf Of Glen Starrett Sent: Monday, January 26, 2004 8:16 PM To: cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook Subject: Re: [cvsnt] [CVSWEB NT] Installation Problems Wing Hang Chan wrote: >I am using WinXP, IIS, the latest CVSNT, CVSWEB, RCS, and ActivePerl. I >followed the instructions from >http://www.devguy.com/fp/cfgmgmt/cvs/cvswebIIS.htm. But when I tested the >page it returns the following message: > >'F:\Web\cgi-bin\cvsweb\cvsweb.cgi' script produced no output > > > I've seen that happen when the permissions aren't right for the application (e.g. the script mapping is set up but the user doesn't have permission to access the script). Check the permissions setup on cvsweb applicaiton, as well as the scripting engine. Regards, -------------------- Glen Starrett _______________________________________________ cvsnt mailing list cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs _______________________________________________ cvsnt mailing list cvsnt at cvsnt.org cvsnt downloads at march-hare.com @CVSNT on Twitter CVSNT on Facebook http://www.cvsnt.org/cgi-bin/mailman/listinfo/cvsnt https://www.march-hare.com/cvspro/en.asp#downcvs